3 removing the self-cleaning panels, 1 remove the side guides (fig.1), 2 slide out the side panels “f” and “g” (fig. 2) – Smeg SCDK380X User Manual

Page 21: 6 removing the door, 1 removing the door with mobile hinges, Instructions for the user

Advertising
background image

23

Instructions for the User

11.5.3 Removing the self-cleaning panels

Remove all the accessories from the oven compartment and carry out the
following operations:
1

Remove the side guides (fig.1);

2

Slide out the side panels “F” and “G” (fig. 2);

3

Extract the rear panel “A” after first unscrewing the threaded ring “C
(fig. 2);

4

Reassemble the panels by returning them to their original conditions.

1)

2)

11.6 Removing the door

11.6.1 Removing the door with mobile hinges

With the door completely open, lift the levers A until they touch the hinges
B and take hold of the two sides of the door with both hands close to the
hinges. Raise the door to an angle of about 45° and remove it. If the
hinges have not locked, repeat the operation, raising the levers A and
keeping the door slightly raised. To reassemble, fit the hinges B into their
grooves, then lower the door into place, ensuring that it remains fitted into
the grooves C, and lower the levers A.

Advertising
This manual is related to the following products: