Sony XAVW1 User Manual
Page 19
Recording on CDR
RCD-W1 (US) 4-233-692-12(1)
Actual page number:
19
The “OVER” indicator
If rec level is too loud, “OVER” appears in the
front panel.
The SRC indicator
Adjusting the Recording
Level (ANALOG IN only)
You can adjust the recording level using the
REC LEVEL control on the front panel. Adjust
the recording level so that the “OVER”
indicator on the level is not normally appears.
Notes
• The frequency of SRC is 32 kHz-48 kHz.
• Audio signals of specially encoded discs may not be
properly recorded.
When the SRC indicator lights up
The SRC (Sample Rate Converter) indicator
lights up Sample Rate Converter is in use.
When a non-standard incoming signal is
received and it will be converted to standard
44.1 kHz for CD playback. This is an
automatic function and does not require any
user intervention.
06REC_RCD-W1.p65
00.12.13, 10:33 AM
19