Sony PCV-RS500 - Manual (Page 36)

VAIO Computer Quick Start
36
To connect the modem cable directly to the computer
1 Unplug your telephone from the wall jack.
2 Plug the modem cable (supplied) into the modem line jack located on the
back panel of your computer
3 Plug the other end of the modem cable into the wall jack.
Connecting the Power Cords
1 Plug the power cord into the AC Input port, located on the back panel of the
computer.
2 Plug both the display and computer power cords into a grounded AC wall
outlet or a power strip.
Your computer has a protective sticker covering the Ethernet port located
on the rear panel. Connect only 10BASE-T and 100BASE-TX cables to the
Ethernet port. Using other cables or a telephone cable may result in an
electric current overload that can cause a malfunction, excessive heat, or fire
in the Ethernet port. For help on connecting to a network, see your network
administrator.
To connect the power cords