Sony CDX-C580R - Manual (Page 8)

8
EN
1
During playback, press (SHIFT).
2
Press (2) (SET UP) repeatedly until
“A.SCRL” appears.
3
Press (4) (n) to select “A.SCRL-ON.”
4
Press (SHIFT)
To cancel Auto Scroll, select “A.SCRL-OFF” in
step 2 above.
Note
For some CD TEXT discs with an unusually large
number of characters:
— Some of the characters are not displayed.
— Auto Scroll does not work.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down momentarily.
Locating a specific point in a track
— Manual Search
During playback, push the SEEK/AMS
control up or down and hold. Release
the button when you have found the
desired point.
Note
If “
” or “ ” appears in the
display, that means you have reached the
beginning or the end of the disc and you cannot
go any further.
To locate preceding
tracks
To locate succeeding
tracks
To search backward
To search forward
SEEK/AMS
SEEK/AMS
Changing the displayed item
Each time you press (DSPL), the item changes
as follows:
$
Elapsed playback time
$
Disc name* 1 /Artist name* 2
$
Track name* 1
$
Clock
$
MOTION DISPLAY* 3
* 1 If you inserted a non-CD TEXT disc, “NO NAME“
appears in the display.
* 2 If you play a CD TEXT disc, the artist name
appears in the display after the disc name. (Only
for CD TEXT discs with the artist name.)
* 3 All the items above are scrolled in the display
one by one in order.
You can label CD and CD TEXT discs with a
personalized name using the disc memo
function, refer to “Labeling a CD” (page 22).
However, if you use personalized labels, they
will always take priority over the original CD
TEXT information when such information is
displayed.
Tip
If the name of the CD TEXT disc is too long, you
can scroll it across the display by pressing (SHIFT),
then (1) (N).
Automatically scrolling a disc name
— Auto Scroll
If the disc name/artist name or track name on
a CD TEXT disc exceeds 10 characters and the
Auto Scroll function is on, the following
automatically scrolls on the display:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
If you press (DSPL) to change the display
item, the disc or track name of the CD TEXT
disc is scrolled automatically whether you set
the function on or off.