Spalding M6711041 - Manual (Page 23)

02/07 ID# M6711041
23
29
29
32
35
31
31
35
30
30
37
36
36
7. Install upper elevator tubes (35) to triangle plates (37) as shown. Install handle assembly (3) to lower
elevator tubes (32) using bolt (29), spacers (36), and nut (31) as shown.
4
Before going on to
next step, set
adjustable system
assembly to the 10’
(3.05 m) setting.
NOTE:
3
8. Insert bolt (29) through left side upper elevator tube (35), then
stretch spring (33) onto bolt (29). Insert bolt (29) through right
side upper elevator tube (35) and secure with nut (31).
35
33
31
35
3
29
33
USE EYE PROTECTION
WHEN INSTALLING
SPRINGS.
WARNING!