Spalding M6711041 - Manual (Page 25)

02/07 ID# M6711041
25
1. Apply height adjustment and moving label (46) to front of pole as shown.
2. A. While holding handle, remove pin (24).
B. Move elevator up or down to desired height.
C. Replace pin (24) full length to lock system at desired height.
SECTION C: APPLY HEIGHT AND MOVING LABEL & HEIGHT ADJUSTMENT
46 10 ft.
(3.05 m)
24
A.
B.
C.
DO NOT ALLOW
CHILDREN TO ADJUST
HEIGHT.
WARNING!
Peel protective
film from surface
of acrylic
backboard prior
to use.
NOTE:
TWO CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY
AND/OR PROPERTY DAMAGE.
WARNING!