Attaching and routing cables, Figure 1-10 – Sun Microsystems Sun Fire X4100 M2 User Manual
Page 19
Advertising
Chapter 1
Setting Up the Server Hardware
11
FIGURE 1-10
Installing CMA Cable Hangers
Attaching and Routing Cables
Use this procedure to attach cables to your server and route them through the CMA.
1. Refer to
for an illustration of the server back panel ports and
a procedure for installing cables to your server.
2. Install cables to your server, as required.
3. Route the cables through the CMA cable hangers.
CMA arm
CMA cable hanger
Advertising