Network set, Menu setting procedures – Sanyo DSR-3009 User Manual
Page 21
20
English
Menu Setting Procedures
When the digital video recorder is connected to a network, NETWORK SET is used to make settings
beforehand from the main unit, but the settings that have been specified from the main unit can also be
changed from the computer.
However, when network settings are changed, the digital video recorder will be momentarily
disconnected from the network and control wills witch to the digital video recorder, so the network
settings will need to be changed as necessary at the computer also. (See p. 3)
IP ADDRESS (
1
)
This enables the IP address for the digital video
recorder to be reset.
SUBNET MASK (
2
)
This enables the subnet mask for the digital video
recorder to be reset.
GATE WAY (
3
)
This enables the gateway for the digital video recorder
to be reset.
PORT (
4
)
This enables the port number for the digital video
recorder to be reset.
The setting range is from 1 to 65535 (Default setting: 80).
PASSWORD SETTING (
5
)
This enables the passwords for each user level to be
reset. (See p. 4)
The password can consist of 4 to 8 alphanumeric characters.
NETWORK SPEED (
6
)
This enables the network speed to be reset.
NO LIMIT/64/128/256/512/1024 (kbps)
When reset from the main unit, the default setting (NO LIMIT) is
restored.
Click [SAVE] to complete the NETWORK menu settings (or changes) that are displayed on the screen.
14. NETWORK SET
If the port is set to a value other than the default
value of “80”, add a “:” followed by the port number
to the end of the IP address when typing in the URL.
Example of URL if the port is set to “81”
http://192.168.0.1:81/
User level
1
2
3
User name
ID1
ID2
ID3
Available
menus
Monitoring live images
m
m
m
Monitoring and
searching for recorded
images
m
m
Starting and stopping
recording, timer
recording, changing
main unit settings, etc.
m
Password (Default value)
1111
2222
3333
3
1
6
4
5
2
L8HBA_US(DSR-3016 NETWORK)(GB only).book 20 ページ ２００３年３月２８日 金曜日 午後６時４４分