Sanyo DSR-3009 - Manual (Page 22)

English
21
Menu Setting Procedures
This displays hard disk information. In addition, if another hard disk has been added and mirroring
recording by the digital video recorder has been set to “ON”, you can also set the drive to be given
priority for the reading of data.
PLAYBACK DRIVE
If mirroring recording by the digital video recorder has
been set to “ON”, you can select the disk drive from
which the recorded data is to be read from menu (
3 3 3 3 ).
What is mirroring?
Mirroring recording is the term used to refer to
recording the same images on two hard disks
when an extra hard disk has been added.
Turning on mirroring is a backup option so
that if the data recorded on one disk becomes
corrupted for some reason, the data from the
other disk that was recorded correctly can be
retrieved instead.
1
Select “Disk 1” or “Disk 2” from the menu.
• DISK 1: Data will be read from Disk 1.
• DISK 2: Data will be read from Disk 2.
2
Click [SAVE] to complete the PLAYBACK DRIVE
menu settings.
1 Hard disk capacity
Displays the total capacity of the hard disk.
If an extra hard disk has been added, the capacities of each
hard disk are shown separately.
2 MIRRORING
This shows the mirroring recording setting for the digital video
recorder.
• ON: Mirroring recording is carried out.
• OFF: Mirroring recording is not carried out.
3 PLAYBACK DRIVE
This displays the number of power failures and period of time that the digital video recorder has been
used for recording.
1
POWER FAILURE
This shows the number of power failures, the date and time of
occurrence, and the date and time of recovery.
2
USED TIME
This shows the period of usage of this unit.
3 FIRMWARE
This shows the firmware version.
15. HDD SET
If these settings are made after an extra hard disk
has been installed, the hard disks will be in the
initialized condition with all recorded images
erased. Any important recorded images should be
stored on a computer.
3
2
1
16. POWER FAILURE/USED TIME
• DISK1 USE: Total recording time for Disk 1
• DISK2 USE: Total recording time for Disk 2
• POWER: Total time the unit has been switched on
1
2
3
L8HBA_US(DSR-3016 NETWORK)(GB only).book 21 ページ ２００３年３月２８日 金曜日 午後６時４４分