Sanyo DSR-3009 - Manual (Page 7)

6
English
Operating Panel and Operation Permissions
1
Previous event (ID2/3)
Used to playback from immediately before an alarm event.
2
Next event (ID2/3)
Used to playback from immediately after the next alarm
event.
3
Speed down (ID2/3)
Used to reduce the playback speed by one step.
4
Speed up (ID2/3)
Used to increase the playback speed by one step.
5
Reverse playback (ID2/3)
Used to play back a recorded image in reverse.
6
Stop (ID1/2/3)
Used to stop playback and display live images.
7
Playback (ID2/3)
Used to play back recorded images.
8
Previous image (ID2/3)
Used to return a recorded image by one frame while playback
is paused.
9
Still (ID2/3)
Used to still images during playback.
F
Next image (ID2/3)
Used to advance recorded images by one frame while
playback is paused.
G Record (ID3)
Used to start normal recording.
H Stop recording (ID3)
Used to stop normal recording.
I Timer (ID3)
If clicked while recording is stopped, the mode changes to
timer standby mode. If clicked during timer standby mode,
timer recording is canceled.
J Search (ID2/3)
Used to display the search screen (setting screen).
K
Copy (ID2/3)
Used to display the copy screen (setting screen).
L Download (ID2/3)
Used to display the download screen (setting screen).
M
Menu setting (ID3)
Used to display the menu screen (setting screen).
N
Disconnect (ID1/2/3)
Used to disconnect from the network and switch from
computer control to main unit control.
The display example is that for the DSR-3016 model.
O
Channel select (ID1/2/3)
Used to select a camera channel when images are being
displayed in a single screen.
• DSR-3009 model: Maximum 9 channels
• DSR-3016 model: Maximum 16 channels
P
Channel display
Used to display the channel number selected by O .
Q
Multi display (ID2/3)
Used to display images in a 9-screen or 16-screen multi-
screen display.
• DSR-3009 model: 9-screen button
• DSR-3016 model: 16-screen button
R
4-screen display (ID2/3)
Used to display images in a 4-screen multi-screen display.
S
OSD Display position change (ID2/3)
Used to change the on-screen display position for information
such as date and time.
OSD display is not available for user level ID1.
* Authorized user levels are indicated in parentheses ( ).
(See p. 20)
Playback buttons
Recording buttons
Setting buttons
Channel switching buttons
If you click on the Multi display or 4-screen display
while logged on at user level ID1, a channel with a
signal will be displayed at random.
1
Q
P
S
O
5
3
8
G
M
J
K
R
2
6
9
H
F
7
N
I
L
4
L8HBA_US(DSR-3016 NETWORK)(GB only).book 6 ページ ２００３年３月２８日 金曜日 午後６時４４分