Playback mode operations ( 2 2 2 2 ) – Sanyo DSR-3009 User Manual
Page 26
English
25
Viewing Images
■
■
■
■ Specifying the Number of Display
Screens (1
1
1
1)
If more than one camera is connected to the digital video recorder, multiple
camera images can be displayed on the screen in a multi-screen format. To
do this, you need to specify the channel numbers for the monitoring
cameras that are to be displayed on the monitor screen.
m
Viewing images in a single-screen display
Click the [CHANNEL SELECT] button on the operating panel and select a single
channel for viewing. Images from the selected channel will appear on the screen as a
single-screen display.
The channel number selected will appear in the [CHANNEL] box.
• DSR-3009 model: 9 channels
• DSR-3016 model: 16 channels
m
Viewing images in a 9-screen or 16-screen multi-screen display
Click the
button on the operating panel. All camera images from the cameras that
are being monitored or that have been registered will appear on the screen in a 16-
screen or 9-screen multi-screen display. In the case of 16-channel screens, the display
will alternate between a 9-screen display and a 16-screen display each time you click
the
button.
• DSR-3009 model: 9-screen display
• DSR-3016 model: 16-screen display
m
Viewing images in a 4-screen multi-screen display
Click the
button on the operating panel. The camera images from the cameras
that are being monitored or that have been registered will appear on the screen in a 4-
screen multi-screen display. Each time you click the
button, the 4-screen multi-
screen changes to show channel numbers 1-4, 5-8, 9-12 and 13-16 respectively.
m
Changing the on-screen display position
Click the
button on the operating panel to change the display position on the
monitor for information such as the date and time.
■
■
■
■ Playback Mode Operations (2
2
2
2)
m
For playback
Click the
H
button on the operating panel.
m
To adjust the playback speed
The playback speed can be increased or decreased in steps by pressing the
E
or
D
buttons on the operating panel during playback.
m
For reverse playback
Click the
F
button on the operating panel.
This operation is possible even when the images are paused.
m
To adjust the reverse playback speed
The reverse playback speed can be increased or decreased in steps by pressing the
E
or
D
buttons on the operating panel during reverse playback.
m
To still playback
Click the
J
button on the operating panel during playback to pause playback.
Click the
J
button again while playback is paused to return to normal playback
mode.
m
For frame feed (forward/reverse)
Stilled playback images can be advanced (or reversed) one frame at a time by clicking
the
K
button (or the
I
button) on the operating panel while playback is paused.
m
For alarm skip
Skip to the next (or previous) alarm event by pressing the
B
button (or the
C
button) on the operating panel during playback.
Top-right
Bottom-right
Not displayed
The display example is that for
the DSR-3016 model.
2
1
L8HBA_US(DSR-3016 NETWORK)(GB only).book 25 ページ ２００３年３月２８日 金曜日 午後６時４４分