Sub-Zero 315 - Manual (Page 19)

19 19
ADJUSTMENTS
Bin Ice Level Adjustment
When the ice maker shuts off the ice level in the bin should
be even with the metal tube inside the bin. If the ice in the
bin is too high or low, turn the ice maker control knob to
adjust the bin thermostat.
1) To lower the ice level, turn the knob counterclockwise.
Usually a 1/8 turn will be enough.
2) To increase the ice level, turn the knob clockwise.
Usually a 1/8 turn will be enough.
Harvest Time Adjustment
The amount of harvest time may be adjusted. It is preset
from the factory at about 3 minutes, which should be ade-
quate to release all cubes and fill the reservoir. If the timer
needs to be adjusted:
1) Unplug or disconnect the electrical power.
2) Remove the kickplate.
3) Remove the control box cover.
4) Locate the timer, and loosen the set screw that holds
the two halves of the timer cam together.
5) Rotate one half of the cam to open or close the lower
portion of the cam. More of an opening equals more
harvest time and less of an opening means less har-
vest time.
6) Tighten the set-screw.
7) Replace the control box cover and kickplate.
8) Reconnect the electrical power.
ICE LEVEL CONTR
OL HIGH
LOW
NORMA L
OFF
Icemaker Control Knob
WARNING
Electrical Shock Hazard
Disconnect electrical power before beginning removal
of parts.
Ice Maker Control Knob
Harvest Time Adjustment