Sony KP-65XBR10W - Manual (Page 28)

24
D:\810nouhin\4080199111\408019911KP57XBRUC\02US-COV-KP57XBRUC\07SET.fm masterpage:Left
Model name1[KP-57XBR10W] Model name2[KP-65XBR10W]
[4-080-199-11 (1)]
Setting Up the
Projection TV
Automatically
The AUTO SET UP feature will allow you to set
the on-screen language and set all receivable
channels.
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
You can also set up the projection TV manually. (see
“Using the CHANNEL SET UP Menu” on page 41)
Notes:
• Perform this function during the day, with the
antenna and/or cable properly connected, to
ensure that all available channels will be
broadcasting and receivable.
• Before you perform AUTO SET UP again, make
sure that the input from ANT (not AUX) is
selected by pressing ANT until “AUX” does not
appear next to the channel number.
• When you perform AUTO PROGRAM, your
CHANNEL FIX and ON/OFF TIMER settings
will be erased.
• When you perform AUTO SET UP, all the
settings in the VIDEO and AUDIO menus are
reset to the factory settings.
Using the buttons on the front panel and inside the
drop-down panel on the projection TV:
1 Press POWER to turn on the projection TV.
2 Press SET UP inside the drop-down panel.
The AUTO SET UP screen appears.
3 Press CHANNEL + to select English,
CHANNEL – to select Spanish.
The screen will change to reflect your choice.
4 Press VOLUME – to continue.
5 Press CHANNEL + to preset channels
automatically.
“AUTO PROGRAM” appears and the
projection TV starts scanning and presetting
channels automatically. While scanning, the
received channel will be displayed on the sub
screen. When all the receivable channels are
stored, the lowest numbered channel will be
displayed.
CHANNEL VOLUME
+
– +
– TV/VIDEO
STEREO
TIMER/ STAND BY
POWER
FLASH FOCUS SET UP
POWER
Press [ SET UP ] to exit.
First Please connect
the antenna.
ESPAÑOL :
ENGLISH :
AUTO SET UP :
[ CH – ]
[ CH + ]
[ VOL – ]
SET UP
ESPAÑOL :
ENGLISH :
[ CH – ]
[ CH + ]
Press [ SET UP ] to exit.
First Please connect
the antenna.
AUTO SET UP : [ VOL – ]
CHANNEL
VOLUME CONTINUE TO
AUTO PROGRAM?
YES: [CH +]
NO : [CH –]
CHANNEL
AUTO PROGRAM