Sony KP-65XBR10W - Manual (Page 32)

28
D:\810nouhin\4080199111\408019911KP57XBRUC\02US-COV-KP57XBRUC\08CTV.fm masterpage:Left
Model name1[KP-57XBR10W] Model name2[KP-65XBR10W]
[4-080-199-11 (1)]
Watching Digital TV
When you have connected the DTV receiver, you
can enjoy digital TV programs. This projection TV
is capable of receiving the 1080i, 720p, 480p and
480i digital TV formats.
Note:
This projection TV is not capable of displaying a
720p format signal as it is. When the 720p format
signal is received, it is converted into a 480p format
signal.
1 Connect the DTV receiver to VIDEO 5 (DTV)
IN on the projection TV. (for details, see pages
13 and 12)
2 Press TV/VIDEO to select VIDEO 5.
The digital TV format being received is
displayed on the screen for three seconds.
Note:
• You cannot select VIDEO 5 unless a DTV
receiver is connected.
3 Select a digital channel on the DTV receiver.
For details, see the Operating Instructions of
the DTV receiver.
4 Adjust the volume on this projection TV.
Tip z
The optimum convergence alignment varies with
digital TV formats. Whenever you find that the picture
blurs, press FLASH FOCUS. (for details, see page 25)
Watching the Picture
in Wide Screen Mode
Automatically
— — — —
AUTO
WIDE
When a 480i format signal with an ID-1 (16:9
aspect ratio recorded) signal is received, the
projection TV automatically selects wide screen
mode.
Notes:
• When the AUTO WIDE function does not work
correctly due to the quality of signal, select wide
screen mode manually. (see page 29)
• The AUTO WIDE function does not work when the
following signals are received:
- 480i format signal without an ID-1 (aspect ratio
recorded) signal
- 480p format signal
- 720p/1080i format signals (The picture is always
displayed in FULL mode)
Set AUTO WIDE in the WIDE SCREEN MODE
menu to ON. (see page 40)
To deactivate the AUTO WIDE function
Set AUTO WIDE in the WIDE SCREEN MODE
menu to OFF. (see page 40)
To view a digital TV program
TV/VIDEO
DTV FORMAT : 480p
Activating the AUTO WIDE function