Sony KP-65XBR10W - Manual (Page 41)

37
D:\810nouhin\4080199111\408019911KP57XBRUC\02US-COV-KP57XBRUC\09CTV.fm masterpage:Right
Adj
u
st
ing Yo
ur
SE
T UP (
m
e
nus)
Model name1[KP-57XBR10W] Model name2[KP-65XBR10W]
[4-080-199-11 (1)]
Select ON to reduce picture noise.
Select OFF to cancel the feature.
NR can be set separately from the MODE settings
of the VIDEO menu.
Select ON to emphasize the black level and to
produce a bolder dynamic picture.
Select OFF to cancel the feature.
To restore the To restore the To restore the To restore the factory settings factory settings factory settings factory settings
Press RESET on the remote control while the
VIDEO menu is selected. To restore each MODE
to the factory setting, press RESET after selecting
the mode to be reset.
Using the AUDIO
Menu
For detailed information on using the remote
control to modify menu settings, refer to “Learning
Menu Selection” on page 35.
To select the AUDIO To select the AUDIO To select the AUDIO To select the AUDIO menu: menu: menu: menu:
Adjust slider right (up) to increase high pitched
sounds.
Adjust slider left (down) to decrease high pitched
sounds.
Adjust slider right (up) to increase low pitched
sounds.
Adjust slider left (down) to decrease low pitched
sounds.
Adjust slider right (up) to emphasize right speaker
volume.
Adjust slider left (down) to emphasize left speaker
volume.
STEREO:
Select for stereo reception when viewing a
program broadcast in stereo.
SAP:
Select to listen to a bilingual broadcast. (non-SAP
programs will be muted when this feature is
selected)
MONO:
Select for mono reception. (use to reduce noise
during stereo broadcasts)
Quick MTS access:
Press MTS on your remote control to cycle through
the MTS options as follows: (STEREO
b SAP b
MONO b STEREO).
(continued)
NR
— Picture Noise Reduction
DYNAMIC PICTURE
— Black Intensity Adjustment
TREBLE
— Sound Adjustment
BASS
— Sound Adjustment
AUDIO
TREBLE
BASS
BALANCE
MTS : STEREO
SPEAKER : ALL ON
EFFECT: OFF
SURROUND LEVEL
Move Select Exit MENU
Sliders
}
MENU
Display , Highlight , Select
BALANCE
— Sound Adjustment
MTS
— Enjoy stereo, bilingual and mono
programs
Note:
• The MTS function is not available for input
from an external equipment connected VIDEO
1, VIDEO 2, VIDEO 3, VIDEO 4 or VIDEO 5
(DTV) IN.