Sony VGC-RC300 - Manual (Page 82)

82 n N
Using Peripheral Devices
Connecting to a Network (LAN)
You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T-type networks with an Ethernet network cable.
Connect one end of a network cable (not supplied) to the network (Ethernet) port on the back of the computer and the other
end to your network. For detailed settings and devices needed to connect to the network, see your network administrator.
!
Your computer has a protective sticker covering the network (Ethernet) port located on the back of the computer. Connect a 10BASE-T, 100BASE-
TX, or 1000BASE-T cable to the network (Ethernet) port. Using an incorrect cable or a phone cable may result in an electric current overload that can
cause a malfunction, excessive heat, or fire in the network (Ethernet) port. For help on connecting to a network, see your network administrator.
✍
The computer can be connected to the network with the default settings.