Sharp SGH-I600 - Manual (Page 28)

SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-7
This Document can not be used without Samsung's authorization
1) Notice that components of the PBA should not be
in damage
13
1) Separate the shield-can and the PBA. 1) Unscrew two points in the INTENNA.
2) Detach the INTENNA Wire from the
shield-can.
14
1) Insert tweezers into the backside of
the LCD module and detach the double
-stick tape as shown in the figure.
1) Insert tweezers into the backside of
the LCD module and detach the double
-stick tape as shown in the figure.
2) Disjoint LCD module.
15
16