Sony CDP-D12 - Manual (Page 16)

Function of Parts and Controls
16
7 Vari Speed Play operation buttons
VARI SPEED ON/OFF button: Press to start Vari
Speed Play.
VARI SPEED +/– buttons: Press to vary the
playback speed in Vari Speed Play.
8 X (pause) button
Press to pause playback. Press during pause to resume
playback.
9 x (stop) button
Press to stop play.
0 m/M (search) buttons
Press to locate a point within a track.
qa SLOW m/M (search at low speed) buttons
Press to locate a point within a track at low speed.
qs ./> (locate) buttons
Press to locate the beginning of a track.
qd H (play) button
Press to start play.
qf Repeat Play operation buttons
REPEAT button: Press to play tracks or a
specified track repeatedly. Press also to cancel A-
B Repeat Play.
A y B button: Press to play a specific portion
repeatedly.
qg Program Play operation buttons
CHECK button: Press to check the contents of the
program.
CLEAR button: Press to delete a track from the
program.
qh >20 button
Use to enter a track number over 20.
qj Numeric buttons (1 to 20)
Use to enter a track number directly.
qk PLAY MODE buttons
CONTINUE button: Press during Shuffle Play or
Program Play to change to normal play.
SHUFFLE button: Press to select Shuffle Play.
PROGRAM button: Press to select Program Play.
Inserting batteries into the remote control
unit
Insert two R6 (size-AA) batteries with the + and –
terminals properly aligned to the markings in the
battery compartment.
About battery life
Under normal conditions, the batteries should last for
about six months. When the remote controller no
longer operates the player, replace both batteries with
new ones.
Notes
• Incorrect use of the batteries may cause a battery
leakage or an explosion. Keep the following:
— Insert the batteries with correct polarity.
— Do not use a new battery with an old one.
— Do not charge the batteries.
— If you don’t use the remote control unit for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
— If battery leakage has occurred, wipe inside the
battery compartment and insert new batteries.
• Keep the remote sensor away from direct sunlight or
strong illumination. Strong light may cause the
remote control function to fail.