Sony CDP-D12 - Manual (Page 29)

29
Track number of the
current track Elapsed time of the current
track
Order in the
program Total number of
tracks in the
program Track number
being checked
m
After about three
seconds
Track number of the
current track Elapsed time of the
current track
Order in the program of the
current track Total number of tracks in
the program
While the player is playing or paused
Each time the CHECK button is pressed, the number
and playing time of the current and those of the
succeeding tracks in the program are displayed in
sequence.
m
After about a second
Track number of the
current track Elapsed time of the
current track
Track number being
checked Playing time of the track
being checked
Changing the contents of the
program
While the player is stopped and the PROGRAM
indicator lights up in the display, do one of the
procedures below to change the contents of the
program:
To Do the following:
Erase a track in
the middle of the
program Press the CHECK button repeatedly until
the number of the unwanted track
appears, and then press the CLEAR
button.
Erase the last
track of the
program Press the CLEAR button. Each time the
button is pressed, the last track is
erased.
Add a track to
the end of the
program Press the numeric button to enter the
track number.
Erase all tracks Press the CONTINUE button or
SHUFFLE button.
Note
When Program Play is selected while a track is being
played, the track is programmed.
To make settings for Program Play by
menu operation
To program the tracks
1
Press the MENU/EXIT button, rotate the AMS
control until “PLAY Mode” appears in the display,
and then press the control.
2
Rotate the AMS control until “PROGRAM”
appears in the display, and then press the control.
3
Press the MENU/EXIT button.
4
Rotate the AMS control to select the track, then
press the control.
5
Repeat step 4 to program other tracks.
To check the contents of the program
While the player is paused, rotate the AMS control to
display the track number, order in the program, and the
total number of tracks in the program.