Sony SLV-AV100UX - Manual (Page 17)

17 Getting Started
Getting Started
continued
12
Press CURSOR > / . to move the cursor (I) to
CENTRE. Then, press CURSOR ? / / to increase or
decrease the volume of the centre speaker so you
have an equal volume balance with the other
speakers at your listening position.
If you selected PHANTOM in step 10, skip this step.
This volume adjustment affects only the PROLOGIC sound
field.
13
Press CURSOR > / . to move the cursor (I) to REAR.
Then, press CURSOR ? / / to increase or decrease
the volume of the rear speakers so you have an
equal volume balance with the other speakers at
your listening position.
If you selected 3CH LOGIC in step 10, skip this step.
The surround speakers’ volume balance is always even.
This volume adjustment affects only the PROLOGIC sound
field.
14
Press EXECUTE.
A programme position appears on the TV screen.
CURSOR
CURSOR
EXECUTE
END
SET :
:
EXECUTE
EASY SET UP
1 2 3 6 5 4 – – – – – 7 –
CENTRE
REAR
+ 8
0
dB
dB
SELECT :
TEST TONE
END
SET :
:
EXECUTE
TEST TONE
EASY SET UP
1 2 3 6 5 4 – – – – – 7 –
CENTRE
REAR
+
+ 8
10 dB
dB
SELECT :
1
Tips
• To adjust the relative volume balance between the front left and right speakers, use BALANCE L/R on the
unit.
• If you change the speaker configuration, reset the modes. See “Reconfiguring the PROLOGIC and
THEATRE sound fields” on page 68.
• If you need to further increase the volume of the rear speakers from the maximum level (+10 dB), see
“Increasing the maximum rear speaker level” on page 69.
Note
• Do not exit EASY SET UP while ITP is presetting channels. If you do, repeat EASY SET UP from the
beginning.