Sony SLV-AV100UX - Manual (Page 44)

Audio/Video Equipment Operations 44
You can control the connected audio and video equipment with this
remote commander. Before operating any equipment, press the function
button corresponding to the equipment. Note that all equipment must
be made by Sony to control with the remote commander.
Controlling the function buttons
The function buttons of the remote commander have the following three
roles.
• Turning on the unit and related piece of equipment (excluding audio
components).
• Switching the input source.
• Switching the remote commander to operate the selected equipment
(see the sections for controlling each piece of equipment from page 47
to 60).
To change the input source, you can also use the function buttons on the
unit.
The following tables show the relationship between the function buttons
(on the remote commander and unit) and the input source.
Function buttons on the remote commander (SYSTEM CONTROL/
FUNCTION)
Press
VHS TUNER
VHS LINE
VIDEO1
VIDEO2
TV* 1
CD
TUNER
TAPE/MD
* 1 If the TV is connected to the unit with only the aerial cable, the unit’s speakers do
not reproduce the sound even if you press this button. When you use the TV
tuner, press TV CONTROL ON (see “Using the TV independently” on page 50).
* 2 “TV” usually doesn’t appear on the TV screen. If another monitor is connected to
the MONITOR VIDEO OUT jack, “TV” appears on the monitor screen.
Audio/Video Equipment
Operations
Selecting the
equipment
The following
indication appears on
the TV screen
Programme position
LINE
VIDEO1
VIDEO2
(TV)* 2
CD
TUNER
TAPE/MD
And the unit’s input switches
to the
Unit’s VCR
EURO LINE IN connector
VIDEO1 (VIDEO IN, AUDIO L/R
IN) jacks
VIDEO2 INPUT (VIDEO, AUDIO
L/R) jacks
EURO-AV connector
CD (AUDIO L/R IN) jacks
TUNER (AUDIO L/R IN) jacks
TAPE/MD (AUDIO L/R IN) jacks
1 2 3
4 5 6
7 8 9
0 >10
SYSTEM OFF
Function
buttons
MASTER VOL
+/–
MUTING
Function buttons
MUTING MASTER VOLUME