Sony SLV-AV100UX - Manual (Page 21)

21 Getting Started
Getting Started
Disabling unwanted programme positions
After tuning the TV channels, you can disable unused programme
positions. The disabled positions will be skipped later when you press
the PROG +/– buttons to select a station. You can also disable
unwanted programme positions using the SET UP CH & VIDEO Plus+
menu (page 27).
1 In step 5 on the previous page, press number button “0” twice to
display the number “0” beside CHANNEL SET.
2 Press EXECUTE.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you can also use
the manual tuning function.
1 Press PROG +/– to select the programme position for which you
cannot obtain a clear picture.
2 Press MENU, then select VHS MENU and press EXECUTE.
3 Select TUNER PRESET and press EXECUTE.
4 Select FINE TUNING. The fine tuning meter appears.
5 Press CURSOR ? / / to get a clearer picture, then press EXECUTE.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Selected programme
position TUNER PRESET
CHANNEL SET
FINE TUNING
ON
PROG4
6
OFF AFT
SET :
6 CH4