Placing the speakers, Connecting an active woofer, Listening through the headphones – Sony SLV-AV100UX User Manual

Page 9

Advertising
background image

9

Getting Started

Getting Started

3

Connect the rear speakers to the SURROUND
SPEAKERS REAR L/R connectors.

Repeat step 1 above for the surround speakers.
If you don’t have rear speakers, skip this step.

Note

• Be sure to connect both left and right speakers. If you connect only

one speaker, the rear speaker won’t reproduce the sound.

CENTRE

R-REAR-L

SURROUND SPEAKERS

(+)

(–)

Placing the speakers

For optimum surround sound effect, place your speakers as shown below.

Tips

• Position the centre speaker so the face of the speaker is aligned evenly with, or slightly behind the faces of

the front left and right speakers.

• Mount the surround (rear) left and right speakers on the walls so they face each other.
• Position the front left and right speakers and centre speaker as close to the same height as possible.

Connecting an active woofer

For further sound improvement, connect an active woofer to MIX OUT with an audio cable
(not supplied). The active woofer will increase bass response. The position of the active
woofer does not affect the sound quality very much.

Listening through the headphones

Connect the headphones to PHONES. No sound will be reproduced from the speakers.

45º

Front speaker

60-90 cm

Rear speaker

OUT

MIX

INPUT

This unit

Active woofer

Audio cable (not supplied)

PHONES

Advertising