Sony CDP-C360Z - Manual (Page 21)

Recording From CDs Recording From CDs Recording From CDs Recording From CDs Recording From CDs
21
Adjusting the Recording Level
(Peak Search) (CDP-CE415 only)
The player locates the highest level among the tracks to
be recorded to let you adjust the recording level before
you start recording.
1
Before you start playing, press PEAK SEARCH.
“PEAK” flashes in the display and the player
repeats the portion of the highest level.
2 Adjust the recording level on the deck.
3 Press p on the player to stop Peak Search.
“PEAK” disappears from the display.
Notes
• The portion with the highest level may differ every time
you try the adjustment on the same disc. The difference is,
however, so slight that you won’t find any problem in
adjusting the recording level precisely.
•
Peak Search does not operate while you open the disc tray
by pressing the EX-CHANGE button.
PEAK SEARCH p
3 Press · to start playing.
At the specified time the play fades out and the
player pauses. “B” in the
B indication appears
in the display.
4 To record on side B, reverse the tape and press ·
or P on the player to resume playing.
Again, the play fades out at the specified time.
To cancel Time Fade
Press EDIT/TIME FADE.
You can freely specify the playing time
See “You can freely specify the tape length” on page 20.
You can change discs during Time Fade
If the play ends before the specified fade-out time, (for
example, when you record CD-singles on a tape) change
the disc. The specified fade-out time is counted only
during playing.
You can fade in to resume playing in Step 4
After you reverse the tape, press FADER.
Note
If you press the 0 or ) button during Time Fade Play,
Time Fade will be cancelled.