Sun Microsystems 2.0 - Manual (Page 17)

2-1
Installing the Adapter 2
This chapter tells you how to install the adapter in your system and verify that
the adapter is correctly installed.
2.1 Performing the Installation
Note – Refer to your system installation or service manual for detailed
instructions for the following tasks.
1. Power off your system, using the standard shutdown procedures
described in Solaris 2.x Handbook for SMCC Peripherals.
2. If you are replacing an SBus card with the SunFastEthernet Adapter,
remove the old card now.
3. Install the SunFastEthernet Adapter in the selected SBus slot.
4. Connect the Ethernet cable to the SunFastEthernet Adapter and to the
hub.
Note – Make sure you have an Ethernet cable for each interface.
5. Connect the MII device to the SunFastEthernet Adapter.
6. Connect the external transceiver to its appropriate hub.