Sun Microsystems 2.0 - Manual (Page 51)

A-1
Running Diagnostics
for Solaris 2.3 and 2.4
A
Note – For SunFastEthernet Adapter diagnostics testing on systems running
Solaris 2.5 and SunOS versions 4.1.3_U1 and 4.1.4, refer to the SunVTS 2.0
User’s Guide (part number: 802-5331).
A.1 Sundiag
Sundiag is an on-line system exerciser that runs diagnostic hardware tests. It is
used primarily with the OpenWindows software interface that enables you to
quickly and easily set test parameters to run tests.
Note – Sundiag does not probe for SunFastEthernet devices by default. For
Sundiag to acknowledge an
hme <num> channel, the .usertest file must be
edited before bringing up Sundiag, as described in the following section.