Sony MZ-DN430 - Manual (Page 36)

36
Connecting the MD Walkman to your computer
After the software installation is completed, connect the MD Walkman to your computer.
1
Insert a recordable disc into the MD Walkman.
2
Insert a new dry battery into the MD Walkman, and connect the MD Walkman
to the computer using the supplied dedicated USB cable.
3
Check the connections.
When the connections have been properly made, “PC ppMD”* appears in the display
of the MD Walkman.
∗ Depending on the MD Walkman, “Net MD” may be displayed.
When using the MD Walkman connected to your computer, it is recommended that you use a new dry
battery. We do not assure the results should there be a mis-operation, transferring failure, or destruction
of audio data caused by insufficient battery power.
Note
MD Walkman
Dedicated USB cable
To the USB
connecting terminal
Computer
Insert a new
dry battery
To the USB jack/
dedicated jack