Sony D-FJ401 - Manual (Page 15)

15
Presetting radio stations
You can preset up to 51 stations: 7 for TV, 4 for WB, 30 for FM and 10 for AM.
1
Press TV, WB, FM or AM to select the band (direct power-on).
2
Press MEMORY for 2 seconds or more.
Preset number 1 will flash in the display. The CD player starts scanning the stations from the
lower frequencies and stops for about 3 seconds when a station is received.
3
If you want to preset the received station, press MEMORY while the preset
number is flashing.
The received station is preset on the preset number 1 and the CD player starts scanning for
the next receivable station. If you do not press MEMORY within the 3 seconds, the CD
player will start scanning for the next receivable station without storing the station.
4
Repeat step 3 until all receivable stations are preset.
If the stations have already been stored, the newly preset stations will replace the old ones.
To stop scanning
• Press TV, WB, FM or AM.
• Press x/CHG•RADIO OFF. The radio is turned off at the same time.
To preset stations manually
If the stations cannot be preset automatically, preset the stations manually.
1 Press TV, WB, FM or AM.
2 Press MEMORY.
The preset number 1 will flash in the display.
3 While the preset number 1 is flashing, tune in a station you want using TUNING +/–, and
select a preset number using PRESET +/–.
4 To store, press MEMORY while the preset number is flashing.
If there was a station stored on this preset number, the newly preset station will replace the old
one.
Note
If you cannot complete step 3 or 4 while the preset number is flashing in the display, repeat from step 2.
To play preset stations
1 Press TV, WB, FM or AM.
2 Press PRESET + or – to tune in a stored station.
Using the radio