Sony D-FJ401 - Manual (Page 20)

20
Connecting a stereo
system
You can listen to CDs through a stereo
system and record CDs on a cassette tape.
For details, see the instruction manual that
comes with the connected device.
Be sure to turn off all connected devices
before making connections.
Notes
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• Use the AC power adaptor for recording. If you
use the rechargeable batteries or dry batteries as a
power source, batteries may become completely
depleted during recording.
• Adjust the volume properly on the connected
device so that the sound will not be distorted.
When using the connecting cord
• If the sound is distorted, connect the device
to the i jack.
• The SOUND function does not work.
• The output level of the i jack goes down.
About the G-PROTECTION and
SOUND functions when using the
connecting cord
• To record high quality CD sound, set the
G-PROTECTION switch to “OFF.”
• The SOUND function works only on the
output sound from the i jack and not work
on the output sound from the LINE OUT
jack.
Stereo system,
cassette recorder,
radio cassette
recorder, etc.
B Connecting your CD player
Connecting cord
Left (white)
Right (red)
to LINE OUT