Sony MZ-RH10 - Manual (Page 34)

34
Recording from a TV or
radio (Analog
Recording)
This section explains how to record from
equipment with analog output, such as a
cassette recorder, radio, or TV.
1
Make connections.
Use the appropriate connecting cord
to suit the source equipment. For
details, see “Optional accessories”
(page 70).
2
Press the jog dial (N/ENT) while
pressing REC(+N)/T MARK to
start recording.
3
Play the source you want to record.
Selecting the recording
mode
Select each recording mode according to
the recording time that you want.
You can record only in Hi-MD mode
on this recorder. If you want to record
in MD mode, connect the recorder to
a computer and record or transfer
audio data using the supplied
software (refer to the “Software
Operation” section).
1
While the recorder is stopped, enter
the menu and select “REC Settings” -
“REC Mode”.
2
Turn the jog dial to select the desired
recording mode, and then press the
jog dial to enter the selection.
The recording mode is saved on the
recorder until it is next changed.
TV, cassette
recorder, etc.
R
(red) L
(white)
Line cable
RK-G129,
RK-G136, etc.
To LINE IN (OPT)
To LINE OUT jacks, etc.
REC(+N)/
T MARK
Jog dial
(N/ENT)
Recording
mode Display Recording time
Linear PCM PCM • Approx. 28 min.
on an 80-minute
standard disc
• Approx. 1 hour
and 34 min. on a
1GB Hi-MD disc
Hi-SP Hi-SP • Approx. 2 hours
and 20 min. on an
80-minute
standard disc
• Approx. 7 hours
and 55 min. on a
1GB Hi-MD disc
MENU
Jog dial