Sony MZ-RH10 - Manual (Page 49)

49
5
Repeat step 4, and then enter all
characters of the label name.
6
Press the jog dial for 2 seconds or
more to enter the title
.
Re-labeling
You can change the titles by doing the
procedure for “Labeling” (page 48).
• The recorder is able to display, but cannot
label using Japanese “Katakana” characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device (in MD mode only).
Assigning tracks or
groups as a new group
(Group Set)
With this function, you can assign
existing tracks or groups to a new group,
and also you can assign a track that
currently belongs to no group to an
existing group.
You can create a maximum of 255 groups
on a disc used in Hi-MD mode and 99
groups on a disc used in MD mode.
Registration of non-consecutive tracks is
not possible (for example, track 3 and
tracks 7 and 8 cannot be assigned to a new
group).
It is not possible to make a new group if
the first track or last track of the group has
been selected from the middle of an
existing group.
Track numbers appear according to their
order on the disc, not their order within
the group.
To move the cursor
up or down Turn the jog dial.
To enter a letter. Press the jog dial
(N/ENT).
To insert a blank
space. Press VOL +.
To delete a letter. Press VOL –.
To move the cursor
from the character
palette to the letter
input area. Press x.
To switch between
capital letters and
small letters
.
Press X.
1) Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
Notes
Functions 1) Operations
1 2 4 5 6 7 8 9 101112 3
1 2 4 5 6 9 101112 3 7 8
Group 1 Group 2
Group 2 Group 1
Assigning tracks 1 to 3 to a new
group
Assigning group 1 and group 2 to a
new group
Track number
Disc
Disc