Sharp XE-A303 - Manual (Page 26)

6. Function programming (Press s to skip . / Press A to terminate.)
To program for the incremented PLU code, return to the step 2.
When you want to program for other than incremented PLU code, return to the step 1.
7. Terminate programming
Sign
• In case negative is programmed for a PLU/subdepartment whose associated department is positive
department, the PLU/subdepartment serves as a coupon PLU/subdepartment, and split price entry is
disallowed for the PLU/subdepartment. It is invalid to program positive for a PLU/subdepartment whose
associated department is negative.
Unit price
PLU/subdept. 1/0 PLU code
Item name
Associated dept.
Print
PGM
0.00 A
(1) Press the A key to terminate PLU programming.
PLU.0072
0072 0.00
ENTER[00]KEY
0072 0.00
s
(2) Press the s key to register the setting.
On the upper line of the display, immediately after
displaying the current text data for the next PLU,
guidance message will be displayed.
On the lower line of the display, the corresponding
PLU code will be displayed.
The PLU code is automatically incremented for a
new PLU programming, and ready for text
programming for the incremented PLU code.
(1) Go to (2) when the function does not need to be
changed from "PLU". Otherwise, press : key to
display "SUBDEPT".
Each time
: key is pressed, the display shows
"SUBDEPT" and "PLU" alternately.
Choose "PLU" for using the PLU code as PLU and
"SUBDEPT" for using the PLU code as
subdepartment.
Default setting is "PLU".
24
A303_1(En) 06.7.22 9:20 AM Page 24