Sharp XE-A303 - Manual (Page 57)

55
Part
3 FOR THE MANAGER Part
2
Part
1
Programming for % and &
The % key is used as an example below.
1. Specify the key to program.
2. Text programming (Press s to skip. / Press A to terminate.)
3. Rate programming (Press s to skip. / Press A to terminate.)
SIGN
02 (-) s
(2) Press the s key to register the rate.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
ENTER RATE
02 15.00 15.00
(1) Enter the rate using numeric keys, using a decimal
point when setting fractional rates.
The rate can be set from 0.00 to 100.00.
Default setting is 0.
ENTER RATE
02 -0.00 s
(3) Press the s key to register the text.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
% _
02 032
% S S
(2) Enter the text.
A maximum of 12 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Use the
S and B keys to delete unnecessary
text data.
Pressing the
P and @ key moves the cursor to
the right and left respectively.
ENTER TEXT
02 0.00
=%=1
02 037
:
(1) Press : key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
%1 PROGRAMMING
02 0.00
ENTER[00]KEY
02 0.00
%
(1) Press the % key to enter % programming.
On the upper line of the display, immediately after
displaying "%1 PROGRAMMING", guidance
message for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
Operator display Key operation
A303_3(En) 06.7.22 4:41 PM Page 55