Sharp XE-A303 - Manual (Page 55)

53
Part
3 FOR THE MANAGER Part
2
Part
1
3. Amount programming (Press s to skip. / Press A to terminate.)
4. Sign programming (Press s to skip. / Press A to terminate.)
5. Discount calculation (for the items) programming (Press s to skip. / Press A to terminate.)
ENTRY FOR SBTL
01 SBTL ENABLE s
(2) Press the s key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the discount calculation for the items
does not need to be changed from "ITEM
ENABLE". Otherwise, press
: key to display
"ITEM DISABLE".
Each time
: key is pressed, the display shows
"ITEM DISABLE" and "ITEM ENABLE" alternately.
Default setting is "ENABLE".
ENTRY FOR ITEM
01 ITEM ENABLE s
(2) Press the s key to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the sign does not need to be
changed from "(-)". Otherwise, press : key to
display "(+)".
Each time
: key is pressed, the display shows
"(+)" and "(-)" alternately.
Choose "(-)" for discount and "(+)" for premium.
Default setting is "(-)".
SIGN
01 (-) s
(2) Press the s key to register the amount.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
ENTER AMOUNT
01 300 300
(1) Enter the amount using numeric keys.
A maximum of 6 digits can be set.
Default setting is 0.
ENTER AMOUNT
01 -0.00 s
(3) Press the s key to register the text.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
A303_3(En) 06.7.22 4:41 PM Page 53