Sony BRS-200 - Manual (Page 116)

116
Disabling the Infrared Remote Commander Supplied with the Camera
Chapt
er 5 VI
SCA Camer
a
O
per
at
ion
s
Disabling the Infrared Remote Commander Supplied
with the Camera
As the Sony BRC-series cameras connected with the switcher are controlled by
the switcher, the Remote Commander supplied with the camera is not used. Set
in the camera menu for the camera to ignore infrared signals.
To prevent camera from malfunctioning, be sure to disable infrared signal
reception on the camera.
Example of the BRC-Z700 camera
Set IR-RECEIVE to OFF in the SYSTEM menu.
For details on the operation of the camera menu, see “Operating the Camera
Menu” on page 114.
For details on the setting for disabling the infrared signal reception from the
Remote Commander, refer to the Operating Instructions supplied with the
camera.
Note
<SYSTEM>
>IR-RECEIVE
IMG-FLIP
PAN REVERSE
TILT REVERSE
DISPLAY INFO
SYNC MASTER
H PHASE
OFF
OFF
OFF
OFF
OFF
STD
10