Sony BRS-200 - Manual (Page 146)

146
Specifications
App
endi
x
Specifications
Signal processing
HD mode/SD mode
HD mode or SD mode is selectable with the menu.
Television system
1080/59.94i, 1080/50i, 480/59.94i, 576/50i
Signal processing system
4 : 2 : 2 : 4 digital component
Quantization bits
Y: 10 bits, C: 10 bits, KEY: 10 bits
Input/output delay
1 H (when the frame synchronizer is OFF)
Inputs/Outputs
Video input BNC type × 4, 800 mVp-p, 75 ohms
HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SD-SDI: 270 Mbps
The frame synchronizer function is built in for all the inputs.
Reference input
BNC type × 2, 75 ohms loop through (An external 75-ohm
terminator is required.)
BB: NTSC 0.429 Vp-p, PAL 0.45 Vp-p
(Tri-level sync: ±0.3 Vp-p is available for HD mode.)
Video output BNC type × 4, 800 mVp-p, 75 ohms
HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SD-SDI: 270 Mbps
DVI-I output DVI-I (Single Link) × 1
DVI-D:
Resolution HD mode: XGA, WXGA, SXGA, WUXGA
SD mode: XGA, WXGA, SXGA
(HDCP not supported)
RGB: R/G/B: 0.7 Vp-p, H/V: TTL
Resolution HD mode: XGA, WXGA, SXGA, WUXGA
HD59.94i (component), HD50i
(component)
SD mode: XGA, WXGA, SXGA
For details on acceptable DVI-I input/output signals, see “Acceptable DVI-I
Input/Output Signal Formats” on page 152.
Reference output
BNC type × 1, 75 ohms
BB: NTSC 0.429 Vp-p, PAL 0.45 Vp-p
(Tri-level sync: ±0.3 Vp-p is available for HD mode.)
Interfaces
REMOTE D-sub 9-pin type (female) × 1
GPI I/O D-sub 15-pin type (female) × 1, 12 inputs/outputs in common
LAN RJ-45 type × 1, 10Base-T/100Base-TX
VISCA RS-232C: Mini DIN 8-pin type × 1
RS-422: 5-pin type × 1
PANEL Processor Unit: D-sub 9-pin type (female) × 1
PROCESSOR Control Panel: D-sub 9-pin type (female) Ч 1