Sony BRS-200 - Manual (Page 81)

81
Setting a Border for a Wipe or PIP
Cha
p
te
r 4
S
witc
h
ing Op
er
at
ion
Setting a Border for a Wipe or PIP
The boundary of videos to be switched with a wipe or the frame of an embedded
video in picture-in-picture are referred to as a “border.” You can set the color
and width of a border.
1
Set a wipe pattern or a video to be embedded for picture-in-picture, referring
to “Switching the Video with a Wipe” (page 72) or “Adjusting the Size and
Display Position of an Embedded Video in Picture-in-Picture” (page 77).
2
Press the MENU button.
3
Display menu page 520 for a wipe and 830 for picture-in-picture.
For the procedure for displaying the menu, see “Menu Operation” on page
46.
4
Turn the F1 to F4 controls to change the color or width of a border.
Example of a wipe
LUM: to set the luminance within the range of 0.0 to 100.0 in units of 0.1
SAT: to set the saturation within the range of 0.0 to 100.0 in units of 0.1
HUE: to set the hue in units of 0.5
WIDTH: to set the border width within the range of 1 to 50 or set it to “Off”
(no border)
You can use the joystick to change the color of a border instead of the F1 to F3
controls. Inclining the joystick forward, backward, left or right adjusts “LUM”
(luminance) and “SAT” (saturation). Turning the dial on the upper part of the
joystick adjusts “HUE.”
WIPE LUM SAT HUE WIDTH 2/2
BORDER 0.0 0.0 0.0 Off 520
Note
For a wipe For picture-in-picture
Border Border