Sharp R-208S - Manual (Page 13)

PREPARATIONS
11
1
[COPY RATIO] key
Press to select an enlargement or
reduction ratio.
To select a preset ratio setting, press the
[COPY RATIO] key and select the
desired preset ratio. To select a ratio
that is not preset, press the [COPY
RATIO] key, select the preset ratio that
is closest to the desired ratio, and then
press the [
] key ( ) or [ ] key
( ) to increase or decrease the ratio in
increments of 1%.
[CLEAR ALL] key (
)
This returns all functions to the default
settings. When pressed in a setting
menu, this returns the settings and
display to the initial state.
[START] key (
) / Ready indicator
The ready indicator lights up when
copying or scanning is possible.
To begin copying, press the [START]
key (
).
The [START] key ( ) is also pressed
to return to normal operation from auto
power shut-off mode.
Shows the current copy ratio.
Shows the selected paper size.
Shows the number of copies that has
been entered with the numeric keys.
A checkmark " " appears when the
exposure has been changed, or when
two-sided copying, sort, 2 IN 1, or
margin shift is selected.
15 15 15
17 17 16
16 16 17
18
19
20
21
READY TO COPY.
100% 8.5x11 0
Display
16
18 19 20 21
3 4 5
17
!AR-208S_208D.book 11 ページ ２００７年１２月３日 月曜日 午後３時３３分