Sharp R-208S User Manual
Page 152
44
INITIAL SETTINGS
Use the following procedure to clear numbers:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "1:FAX NUMBER" appears, and
then press the [ENTER] key.
4
Press the [
] key (
) or [
] key (
)
to select the type of auto-dial number
that you wish to delete.
To delete a Rapid Key,
select "1:RAPID KEY".
To delete a Speed Dial
number, select
"2:SPEED #".
5
Press the [
] key (
) or [
] key (
)
until "2:CLEAR" appears, and then
press the [ENTER] key.
6
Enter the Rapid Key or Speed Dial
number that you wish to delete.
To delete a Rapid Key,
press the appropriate
Rapid key.
To delete a Speed Dial
number, enter the 2-digit
number with the numeric
keys and then press the
[ENTER] key.
7
Press the [ENTER] key.
Return to Step 5 to clear
another number.
8
Press the [MENU] key.
Press the [MENU] key a
number of times until you
exit.
"2:ENTRY MODE"
Selection
"1:FAX NUMBER"
Selection
"2:CLEAR"
Selection
• A Rapid Key or Speed Dial number cannot
be deleted if it has been stored in a Group
Key.
• A Rapid Key or Speed Dial number cannot
be deleted if it is being used for a
transmission that has been stored or is in
progress.
Note
!AR-FX13_sec.book 44 ページ ２００７年１１月２８日 水曜日 午後４時２２分