Sharp R-208S User Manual
Page 85
APPENDIX
83
10
*
1
When making multiple duplex copies, the copy speed will vary based on the
environment conditions.
*
2
The first-copy time is measured after the power save indicator turns off following
power on, using the document glass with the polygon rotating in the copy ready
state and "LSU SETTING" set to ON in the user programs (8-1/2" x 11", paper fed
from paper tray).
The first-copy time may vary depending on machine operating conditions and
ambient conditions such as temperature.
The time from power off until the first copy is output varies depending on the
installation site and the state of the machine in use.
*
3
The warm-up time may vary depending on machine operating conditions and
ambient conditions such as temperature.
*
4
Not including toner cartridges.
Fusing system
Heat rollers
Developer system
Magnetic brush development
Light source
Cold cathode fluorescent lamp
(CCD: 3 components; R, G, and B)
Resolution
Scan: 600 x 300 dpi Output: 600 x 600 dpi(AUTO/TEXT mode)
Scan: 600 x 600 dpi Output: 600 x 600 dpi(PHOTO mode)
Gradation
256 tones (8 bits)
Power supply
120 V, 60 Hz, 8.0 A
Power consumption Max. 1.0 kW
Space requirements
(with trays extended)
31.6" (W) x 17.6" (D) (802 mm (W) x 445 mm (D))
Weight*
4
Approx. 43.9 lbs. (19.9 kg)
Approx. 45.4 lbs. (20.6 kg)
Dimensions
20.4" (W) x 17.6" (D) x 14.6" (H)
(518 mm (W) x 445 mm (D) x 371 mm (H))
Operating
conditions
Temperature: 50
°
F to 86
°
F (10
°
C to 30
°
C)
Humidity: 20% to 85%
Noise level
Sound Power Level Lw
A
(1B=10dB)
Copying: 6.2[B]
Standby: 3.2[B]
Sound Pressure Level Lp
A
(bystander positions)
Copying: 48[dB(A)]
Standby: 17[dB(A)]
Sound Pressure Level Lp
A
(operator position)
Copying: 52[dB(A)]
Standby: 17[dB(A)]
Noise emission measurement in accordance with ISO 7779.
Emission
concentration
(measured
according to RAL-
UZ62 : Edition Jan.
2002)
Ozone:
0.02 mg/m
3
or less
Dust:
0.075 mg/m
3
or less
Styrene: 0.07 mg/m
3
or less
!010-appendix.fm 83 ページ ２００７年１２月２０日 木曜日 午前８時５１分