Sharp R-208S - Manual (Page 57)

USER SETTINGS
55
7
4
AUTO SHUT-OFF
TIME
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
• This function automatically
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when
the power is on. All lights except
the power save indicator go off.
To resume normal operation,
press the [START] key (
).
Normal operation also resumes
automatically when a print job is
received or scanning is begun
from a computer. While in auto
power shut-off mode, no keys
(except the [START] key (
))
can be used.
7 LAYOUT IN 2IN1
1: PATTERN 1
2: PATTERN 2
• Use this setting to select the
layout pattern when two original
pages are copied onto a single
sheet of paper (see page 31 for
the layout patterns).
8
OFFSET
FUNCTION 1: ON
2: OFF
• When enabled, this function
offsets the position of each
set of copies in the output tray
in copy mode, and each print
job in printer mode.
9
ROTATE ORIG.
IMAGE* 1: ON
2: OFF
• When two-sided copying is
performed, this function rotates
the image on the back of the
original. This is convenient
when binding the copies at the
top (tablet binding).
10
AE/TEXT
RESOLUTION 1: 300dpi
2: 600dpi
• This setting is used to change
the copy resolution in AUTO and
TEXT mode from 600 x 300 dpi
to 600 x 600 dpi (high-quality
mode). Scanning is slower
when high-quality mode is used.
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation
* AR-208D only
!AR-208S_208D.book 55 ページ ２００７年１２月３日 月曜日 午後３時３３分