Sanyo VCC-ZM300 - Manual (Page 17)

PRIVACY MASK SETTING (PRIVACY MASK)
PASSWORD LOCK cancellation
For use when PASSWORD LOCK is ON
1 Press the SET button.
The PASSWORD screen will appear.
2 Enter the factory set password “1234”.
Use the cursor button (j or l) to select “1”, then use
the cursor button (c).
To move the cursor to the next “*” digit.
3 Use the same steps to enter “2,” “3,” and “4,” then press
the SET button.
“ OK” will appear and BACK for MENU will be blinking. Press
the SET button again. The PRIVACY MASK SETTING screen
will reappear and “ OFF” will be blinking for PASSWORD LOCK.
PASSWORD changes
You can change the password with PASSWORD LOCK in either
the ON or OFF setting.
1 Use the cursor button (j or l) to move the cursor to
SET for PASSWORD CHANGE and press the SET button.
The PASSWORD (NOW PASSWORD) screen will appear.
2 Use the cursor button (d or c, j) to enter the current
password (Ex: 1234), then press the SET button.
The PASSWORD (NEW PASSWORD) screen will appear.
3 Use the cursor button (d or c, j) to enter a new
password (Ex: 4321), then press the SET button.
“ OK” will appear and BACK for MENU will be blinking. Press
the SET button again.
The PRIVACY MASK SETTING screen will reappear.
1 3
PASSWORD
¤¤¤¤ SET ‚
-
MENU BACK
PASSWORD
1234 SET ‚
-
OK
PRIVACY MASK SETTING
PASSWORD LOCK OFF ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
1 2
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
PASSWORD
(NOW PASSWORD)
**** SET ‚
-
PASSWORD
(NOW PASSWORD)
1234 SET ‚
-
PASSWORD
(NEW PASSWORD)
**** SET ‚
-
L5AA2/US GB 2002, 5, 24
Eng
lish
16