Sanyo VCC-ZM300 - Manual (Page 26)

VIEW SETTING
Backlight compensation additional settings 1
•••• Multi-spot evaluative metering (MULT)
1 Use the cursor button (j or l) to move the cursor to
BLC, then use the cursor button (d or c) to select a
backlight compensation method. (Ex: MULT) Then press
the SET button.
The BLC SETTING screen will appear.
Available settings:
• MULT (Multi-spot evaluative metering): Evaluates the entire
screen and corrects according to the best image obtained.
• CENT (5 spot centerweighted average metering): Measures
light mainly at the center and corrects according to the best
image obtained. (See p26)
• MASK (48 multi-spot metering): Covers bright areas such as
persons with mask patterns and treats light measurement
output as irrelevant. (See p28)
2 Use the cursor button (d or c) to select the value of
BLC WEIGHT. (Sets backlight and brightness level.)
Available settings: 0 – 15
Note: The larger the number, the more backlighting works.
3 Use the cursor button (j or l) to move the cursor to
BRIGHT, and then use the cursor button (d or c) to
select the compensation level.
Available settings: 0 – 15
Note: When the number becomes larger, it brightens, and the
compensation level can be set for the brightness of the
backlighting.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
Note: When using multi-spot evaluative metering, the
background behind the target object will become very
dark. If a target image in the center of the image is too
bright while using the multi-spot evaluative metering
mode, switch to the
5 spot centerweighted average
metering mode.
1 2 IRIS SETTING
BLC MULT ‚
SENSE UP OFF
(LEVEL)
н-----ъ+------ь 40
BLC SETTING
(BLC WEIGHT)
н------ъ------ь 7
(BRIGHT)
н------ъ------ь 7
L5AA2/US GB 2002, 5, 24
En
g
lis
h
25