Sanyo VCC-ZM300 - Manual (Page 36)

VIEW SETTING
C Electronic SHUTTER setting
Sets the electronic shutter to either the fast shutter speed mode (SHORT) or the slow shutter speed mode (LONG).
Fast shutter speed (SHORT) mode setting
1 Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
2
Use the cursor button (j or l) to move the cursor to
SHUTTER, then use the cursor button (d or c) to select
the speed mode for the electronic shutter. (Ex: SHORT)
Then press the SET button.
The ES SETTING screen will appear and 60 (1/60 sec) will be
blinking. This setting is suitable for fast moving target objects.
3 Use the cursor button (d or c) to select a electronic
shutter speed.
Available settings: 60, 100, 250, 500, 1000, 2000, 4000,
10000
Note: SHORT mode cannot be set if SENSE UP is activated or IRIS
is “ON”.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
1 2 3
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER SHORT‚
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA OFF
PRESET OFF
MENU BACK
ES SETTING
SHUTTER SPEED 60
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
En
g
lis
h
35