Sanyo VCC-ZM300 - Manual (Page 22)

LENS SETTING (LENS)
5 V-RESO.UP (Vertical resolution) setting
Use the cursor button (j or l) to move the cursor to
V-RESO.UP, then use the cursor button (d or c) to
select the vertical resolution. (Ex: ON)
Note: When V-RESO.UP is set to “ON”, vertical resolution
sensitivity for still pictures in the electronic zoom field will
be improved but afterimages of moving objects will be
more conspicuous.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
Note:
V-RESO. UP will be automatically set to OFF when any of the
following settings is made.
• IRIS: AUTO item SENSE UP (activated)
• SHUTTER: LONG
• AGC: DNR (ON)
MIRROR SETTING
1 Use the cursor button (j or l) to move the cursor to
MIRROR, then use the cursor button (d or c) to select
the mirror image effect (Ex: H).
The image will be inverted horizontally. The image will change
as described below each time the cursor button is pressed.
• OFF: Normal image • V: Inverted vertically
• H: Inverted horizontally • HV: Inverted horizontally and
vertically
2 To return to the normal screen, use the cursor button
(l) to select END at the bottom of the screen, then press
the SET button.
5
ZOOM SETTING
SPEED 4
EL ZOOM x4
V-RESO.UP ON
PRESET OFF
MENU BACK
1
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
OFF H V HV
L5AA2/US GB 2002, 5, 24
En
g
lis
h
21