Sanyo VCC-ZM300 - Manual (Page 43)

VIEW SETTING
ALARM SIGN setting
This item is set in the MOTION SETTING screen.
Use the cursor button (j or l) to move the cursor to OFF
for ALARM SIGN, and then use the cursor button (d or c)
to select ON.
Available settings:
• ON: The camera ID display blinks when motion is detected.
• OFF: The camera ID display does not blink when motion is
detected.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
MOTION SETTING
SIZE SET ‚
MASKING ON ‚
SENSITIVITY SET ‚
ZOOM OFF
INTERVAL 5S
ALARM SIGN OFF
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
Eng
lish
42