Sony ER-A420 - Manual (Page 130)

Programming the parameter of the slip printer
* AB: Initial slip feed line (0 to 64)
CD: Slip print max. line no. (0 to 99)
E:
Validation printing counter (1 thru 9 times)
To inhibit validation printing, enter 0.
F: Feed lines after printing of a tray subtotal (0 thru 9 lines)
Entering 009910 to ABCDEF
Setting the time limit for THE TILL TIMER TM
The machine counts the number of times the drawer is left open for longer than a programmed time limit. The
counter will be incremented by one each time a programmed time limit is reached. The time limit for THE TILL
TIMER
TM can be preset for 0 to 255 seconds. The count is printed on the general report and cashier report.
Setting the time limit as 30 (seconds).
2617 . @
30 a
Print Key operation
Example
2617
. @ a
To program 0
Time limit
1 to 255 seconds
Procedure
2617 PGM 2
2615 . @
009910 a
Print Key operation
Example
2615
. @ a
* A B C D E F
When A thru F are zeroes
Procedure
2615 PGM 2
128
ER-A410/A420(SEC)-4 03.12.22 0:20 PM Page 128