Sony ER-A420 - Manual (Page 18)

16
Cashier codes are available in two variants: Variant 1, in which they are displayed (“0000” to “9999”), and
Variant 2, in which they are not displayed (always “
”).
When the cashier code is assigned by the following procedure, the register prints the four-digit cashier code
(variant 2: “
”) and the cashier name both on the receipt and journal for every transaction.
All of these settings depend on how the register has been programmed. For the selection of these
settings, consult your local dealer.
You can disable receipt printing in the REG mode to save paper using the receipt function. To disable receipt
printing, press the
q key in the OP X/Z position. This key toggles the receipt printing status ON and OFF. To
check the receipt printing status, turn the mode switch to the OP X/Z position or press the c key in the REG
mode. When the function is in the OFF status, the receipt off indicator “_” illuminates.
Your register will print reports regardless of the receipt status. This means that the receipt roll must
be installed even when the receipt state is “OFF” when taking reports. Note
Receipt ON/OFF function 4
Note
‹
Cashier code
To display the current cashier code
‹
Cashier code
‹
‹ ‹
■ Sign-on
Variant 1 :
(Code is displayed.)
Variant 2 :
(Code is not displayed.)
■ Sign-off
Variant 1 / Variant 2 :
Procedure
✱ ✱ ✱ ✱
✱ ✱ ✱ ✱
Cashier code entry key 3
ER-A410/A420(SEC)-1 03.12.22 0:13 PM Page 16