Siemens se5880 - Manual (Page 25)

SIEMENS se5880 Ethernet Security Router
User’s Guide Chapter 3 Easy Setup
Untrusted Interface Configuration
SIEMENS 19
Trusted Interface Configuration
Trusted Interface information is configured on the Trusted Interface Configuration page.
To configure the Trusted Interface:
1. In IP Address, enter the network address of the router. This address must be globally unique unless NAT
has been enabled.
2. In Subnet Mask, enter the subnet mask to use along with the IP address to determine if specific LAN IP
traffic should be forwarded to the WAN.
3. Click Save and Reboot. The router will reboot with the new configuration settings.
On completion of the reboot process, you will be required to login again.