Parent control (v-chip operation continued) – Sharp 32N-S500 User Manual
Page 18
18
Parent Control (V-CHIP operation Continued)
4
You can select “BLOCK” or “– – – – –” (non BLOCK)
from each RATING by pressing
CH UP (
8
) or
DOWN
(
9
) and
VOL (+) or (–) if your select “Cdn. FRENCH
RATINGS” in step 2.
L
The
screen displays as follows when the picture is blocked
due to V-CHIP being activated.
A) PIP (Picture In Picture) is OFF
This is shown as page 17 [
L
To cancel the V-CHIP BLOCK
screen while V-CHIP BLOCK has been activated].
B) PIP is ON
When the Main Picture is blocked, Main Picture will turn to blue
and “V-CHIP has been activated” will be displayed.
(Main and Sub Channel No. are displayed, but Sub Picture is
not displayed.)
This message will remain the same on the screen. Cancel the V-
CHIP BLOCK temporarily at the V-CHIP TIMER mode or change
to other channel in this case.
When the Sub Picture is blocked, Sub Picture will turn to blue
and “V-CHIP has been activated” will be displayed. This message
will remain the same on the screen. Cancel the V-CHIP BLOCK
temporarily at the V-CHIP TIMER mode or change to other
channel in this case.
V-CHIP TIMER mode during PIP ON
3
Press
CH UP (
8
) or
DOWN (
9
) to select “DOWNLOAD”,
press
VOL (+) or (–) to activate “ON”.
4
Press
MENU to exit.
L
DOWNLOAD V-CHIP DATA
1
If you watch the program with “New Rating System
Data”, DOWNLOAD screen will be displayed.
2
DOWNLOAD screen will disappear, if DOWNLOAD is
finished.
•
DOWNLOAD would not be started if you don’t watch
the program with New Rating System Data.
[3]-B. Additional mode (Example)
1
Repeat steps 1 to 4 of [1] MPAA RATING to access V-
CHIP select mode.
2
Press
CH UP (
8
) or
DOWN (
9
) to select “Cdn. ENGLISH
RATINGS”, then press
VOL (+) or (–).
3
You can select “BLOCK” or “– – – – –” (non BLOCK)
from each RATING by pressing
CH UP (
8
) or
DOWN
(
9
) and
VOL (+) or (–).
(CANADIAN ENGLISH INDIVIDUAL BLOCK)
(CANADIAN FRENCH INDIVIDUAL BLOCK)
(DOWNLOAD screen)
(After download, the new rating data)
1 2
(Main Picture screen)
1 2
(Main and Sub Picture screen)
Sub
Picture
1 2
(V-CHIP TIMER mode)
Main
Picture
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
NOTE:
CH
CH